***Email problem***

Are you responsible for making OCS work -- installing, upgrading, migrating or troubleshooting? Do you think you've found a bug? Post in this forum.

Moderators: jmacgreg, michael, John

Forum rules
The Public Knowledge Project Support Forum is moving to http://forum.pkp.sfu.ca

This forum will be maintained permanently as an archived historical resource, but all new questions should be added to the new forum. Questions will no longer be monitored on this old forum after March 30, 2015.
Posts: 1
Joined: Thu Jun 07, 2012 7:46 am

***Email problem***

Postby ismetferdi » Fri Jun 08, 2012 7:33 am

Dear PKP Support Team,

We have trouble with email sending. We tried every tips which was provided on forum page by you or users. (comments off in email setting, tried writing PLAIN or LOGIN for smtp_auth, contacted with technical service :), etc.) But all didn't remedy. I send our system infos and php.ini email configuration. Please guide us. Soon we invite our authors for the conferences. But email system doesn't work. This is really a shame for us. We are waiting for your urgent support. Thank you much in advance.

Best Regards,


System Infos:
OCS Current version

Server Information
OS platform WINNT
PHP version 5.3.6
Apache version Not available
Database driver mysql
Database server version 5.5.13

Here is our php.ini email settings

Code: Select all


        ; Use SMTP for sending mail instead of mail()
        smtp = On

        ; SMTP server settings
        smtp_server = mail.xxx.com
        smtp_port = 587

        ; Enable SMTP authentication
        ; Supported mechanisms: PLAIN, LOGIN, CRAM-MD5, and DIGEST-MD5
        smtp_auth = LOGIN
        smtp_username = MYusername
        smtp_password = MYpassword

        ; Allow envelope sender to be specified
        ; (may not be possible with some server configurations)
        allow_envelope_sender = Off
        ; Default envelope sender to use if none is specified elsewhere
        ;default_envelope_sender = xxxx

        ; Enable attachments in the various "Send Email" pages.
        ; (Disabling here will not disable attachments on features that
        ; require them, e.g. attachment-based reviews)
        enable_attachments = On

        ; Amount of time required between attempts to send non-editorial emails
        ; in seconds. This can be used to help prevent email relaying via OJS.
        time_between_emails = 3600

        ; Maximum number of recipients that can be included in a single email
        ; (either as To:, Cc:, or Bcc: addresses) for a non-priveleged user
        max_recipients = 10

        ; If enabled, email addresses must be validated before login is possible.
        require_validation = On

        ; Maximum number of days before an unvalidated account expires and is deleted
        validation_timeout = 14

Posts: 1
Joined: Mon Jul 16, 2012 7:21 am

Re: ***Email problem***

Postby vaniafreitas » Mon Jul 16, 2012 9:59 am

Good afternoon, I would like to know how to configure email in OCS, because I configured the SMTP port = 587 but did not work, perhaps it is the version of php 5.2.17? I need help.

Posts: 4191
Joined: Tue Feb 14, 2006 10:50 am

Re: ***Email problem***

Postby jmacgreg » Mon Jul 23, 2012 10:37 am

Hi vaniafreitas,

Why are you trying port 587? Is your server set up to use that port for SMTP? (Servers typically use port 25 for SMTP.) If you could provide us with more information on what your server is (eg. operating system and version) we might be able to provide more assistance. Additionally, you may find this FAQ entry helpful.

Ferdi, unfortunately our team doesn't have much experience with Windows servers. As with vaniafreitas above, you sure that the port number you specify is correct? You should also be able to contact the person or organization who administers your mail server to determine what you should use for your server's authentication type (LOGIN/AUTH/PLAIN/etc.), and what the password, if any, is. If you are using an external email server to send mail, you may find the following links helpful:




Return to “OCS Technical Support”

Who is online

Users browsing this forum: Yahoo [Bot] and 1 guest